Catalyst & Accelerators
The key for selecting the optimal initiator lies in understanding the key elements of the curing process during application. Organic peroxides are applied in all composite market and many others industries. Euroresins International Group offers you a wide range of initiators from MEKP standard peroxides to the elevated cured with a high and consistent quality. For safety reasons, never mix the peroxides and accelerators at the same time into the resin. Prevent the cause of fire or explosions by only stirring them one after another into the resin. Check our guidelines for working with peroxides.
- MEKP Methyl ethyl ketone peroxide
Name Description Product Data Sheet Curox M102 Long geltime, phthalate free, less foaming. Applications: is used as an initiator (radical source) in the curing of unsaturated polyester resins and vinyl ester resins. Main application: curing of large moulded parts at ambient temperature in combination with cobalt accelerators. (PDS) Curox M103 Long geltime, less foaming. Applications: is used as an initiator (radical source) in the curing of unsaturated polyester resins. Main application: curing of moulded, casted or winded glasfibre reinforced products atambient temperature in combination with cobalt accelerators. (PDS) Curox M202 Low water content, phthalate free. Applications: is used as an initiator (radical source) in the curing of unsaturated polyester resins. Main application: curing of moulded parts at ambient temperature in combination with cobalt accelerators. (PDS) Curox M302 Normal reactivity, phthalate free. Also in RED version. Applications: is used as an initiator (radical source) in the curing of unsaturated polyester resins. Main application: curing of moulded parts at ambient temperature in combination with cobalt accelerators. (PDS) Curox M303 Medium reactivity. Also in RED version. Applications: is used as an initiator (radical source) in the curing of unsaturated polyester resins. Main application: gelcoats, curing of moulded, casted or winded glasfibre reinforced products at ambient temperature in ombination with cobalt accelerators. (PDS) Curox M312 Medium reactivity. Approved gelcoat type. Applications: is used as an initiator in the curing of unsaturated polyester resins and gelcoats. Main application: curing of moulded parts at ambient temperature in combination with cobalt accelerators. Advantages: High efficiency with special pre-accelerated and stabilized resin types. (PDS) Curox M402 Faster gel than Curox M403, phthalate free. Also in RED version. Applications: is used in the curing of unsaturated polyester resins. Main application: casting of buttons or centrifugal casting of button sheets at ambienttemperature in combination with small amounts cobalt accelerator (PDS) Curox M403 Faster gel and cure than Curox M303. Applications: is used in the curing of unsaturated polyester resins. Main application: Hand lay-up, spray-up, continuous laminating, centrifugal casting, filament winding and polyester concrete. (PDS) - AAP Acetylacetone peroxide
Name Description Product Data Sheet Curox A 300 This ketone peroxide is used as an initiator (radical source) in the curing of unsaturated polyester resins. Main application: curing of thin-wall moulded parts at ambient temperature in combination with cobalt accelerators. (PDS) - Diacyl Peroxides
Name Description Product Data Sheet Curox BP 50 FT (FT1) 50% BPO powder with phthalate (free flowing).Main application: curing of castings and moulded parts at ambient temperature in combination with amine accelerators, curing of roadmarking colours and coatings. (PDS) BENOX L-40LV Low viscosity sprayable 40% BPO dispersion of dibenzoyl peroxide. Application: is specifically designed for use in “curing” unsaturated polyester and vinyl ester resins. (PDS) - Cumyl Hidroperoxide
Name Description Product Data Sheet CUROX CM-70 Lower exotherm temperature, longer gel & cure than CM-75, for thicker laminates. Applications: vacuum infusion / plastic bag – technology ;curing of hand/spray-lay up reinforced parts at ambient temperature in combination with cobalt or cobalt/amine accelerators. Mainly used for thicker laminates. (PDS) CUROX CM-75 Lower exotherm temperature, long gel time, good final cure for thicker laminates. Applications: vacuum infusion / plastic bag – technology; curing of hand/spray-lay up reinforced parts at ambient temperature in combination with cobalt or cobalt/amine accelerators. Mainly used for thicker laminates. (PDS) - Hot / Elevated Cure